FC3S FC2K Headlight Projector Kit

OVERVIEW FC3S FC2K PROJECTOR KIT:

This headlight bracket is designed to facilitate the ease of installation, bumper removal for the FC2K(FC2000) and to address the horrible night vision that plagues these bumpers.

This kit allows you to aim the projectors properly up and down. It’s default configuration would be the best so you don’t blind oncoming traffic.

Please Note: Halo Rings are OPTIONAL. They are highly recommended though if you want your bumper to be easily removable.

Instructions can be found here

 

What’s inside?:

1x LH FC2K Projector Bracket

1x RH FC2K Projector Bracket

8x Button Head Screws

4x M4 Bolts (Adjustment knobs)

2x Inner Adjustment Stands (Larger Diameter)

2x Outer Adjustment Stands (Smaller Diameter)

4x Socket Head Cap Screws

4x M6 Flange Nuts

4x M4 Jam Nuts

4x Low Beam Projectors (Unless a different option is chosen)

2x Plug n Play Harness for Projectors (One for Each Side)

(OPTIONAL) 2x 3D Printed LED Halo Combo Lights, 2x Wiring Harness for Combo Lights

2x Dummy Plugs for FC2K Turn Signals

DISCLAIMER:

This bracket cut requires some cutting of your FC2K bumper(the long two holes on each side of the bumper) to clear the bracket. The bracket spaces the projectors as far forward as possible to get the most optimal beam pattern. We are not responsible for your bumper not fitting correctly. We are also not responsible for any installation errors. Please use proper safety equipment when performing the following steps to fit this bracket kit.

Special thanks:

Thanks to Gabriel Gonzalez for working with me to get a prototype installed on his car. Thanks to Caleb Yee for letting us use his cut up FC2K headlight buckets.